详细介绍:
订做防爆配电箱防爆配电柜钢板焊接防爆配电柜
■外壳采用优质钢板焊接成型,内装各种防爆电器, ■ The enclosure is welded by high-quality steel plates.Inside will be
可按 照用户提供的电器原理图及主要技术参数定配 installed explosion-proof electrical appliances which can be reatively
电柜的 外形尺寸并选用相应的防爆电器,可根据要求 selected according to be installed in flush plate.Directly operating
制作成面 板上直接操作或开门后操作等形式。 or operating after opening is possible.
订做防爆配电箱防爆配电柜钢板焊接防爆配电柜
常见方案举例: Examples:
(一)、多路动力(照明)配电 ◆A . Multi-circuit power(illumination)distribution box Through
通过将多个防爆断路器或动力(照明)配电 benig made up of several explosion-proof breakers or power (illumi
箱及数个防爆接线箱组合,可在电压380V,电流630A nation)distribution boxes and a few explosion-proof junction boxes,the
的三相 交流50Hz配电系统中实现动力,照明配电设 distribution box can bransform, distribute and control ower and energy of
备的电能转换分配及控制。 380V 630V,50Hz.eletromagnet-system.
(二)、多路电磁起动配电 ◆B . Multi-circuit electromagnet-starting distribution box
通过将多个防爆电磁起动器或电磁起动箱 Through being made up of several explosion-proof electromagnetic starters
和防爆断路器、操作柱和防爆接线箱等组合,可在 or electromagnetic staring boxes,explosion-proof CB,operating post and
电压380V的三相交50Hz配电系统中实现动力配送 explosion-proof juncitonbox,the contribution cn transmit ower and centrally
及电动机的集中控制,并可根据要求加装信号、 control the motors of 380V,50Hz eletrical system,The branch current canreach
电压表,电流表等监控装置。 up to 160A to user'srequirement wo as to be controlled remotely.And the
(三)、多路降压起动配电 signal lamp.Voltmeter,ammeter,etc can be added as required.
将防爆降压起动箱置于防护柜中, ◆C,Multi-circuit voltage-reduced starting distribution box
实现对交流50Hz、电压为380V,电路中容量为95KW Explosion-proof voltage-reduce starter is put in the box to unfrequently start
及以下的三相笼型电动机的不频繁降压起动,具有短 the motors of 50Hz, 380V,95kW and below-3phase squirra-case.lt has the
路、缺相、过流堵转等保护功能,可用手动、自动 protections of short-circuit,phase-failure,overcurrent and motor-block.Beng
和远控等多种方式来控制。 controlled mannually,automatically or remotely is availabe.
(五)、混合型 ◆ D.Meter-controlling,inspect-controlling Through inner explosion
根据用户要求,将相应的防爆电器组合, -proof meter of auxiliary instrument,theparameter,pressure,temperaturd of
从而满足用户现场的需要,配电柜的常见外形尺寸。 circuit can be mesaured and inspectde.
符合GB3836-2000,IEC60079标准要求 ◆ E.Compexity type Combine appropriate appropriate applicanes
to user's require ment to meet the demands on site.anel's dimension is freely
determined as required.
● 2.Suitable for GB3836-2000,IEC60079 standard req
订做防爆配电箱防爆配电柜钢板焊接防爆配电柜
客户须知:
1、材质:铝合金、钢板、工程塑料、不锈钢(304/316)
2、等级:ExdIIBT4/T6/ExdIICT4/T6 DIP A21T4/T6。
3、元件:正泰、德力西(默认).常熟、施耐德ABB。
4、报价:空箱还是成套提供请与销售说明即可。
5、安装:挂式安装为默认、立式安装可说明。
6、防雨:默认为户外安装,户外使用增加防雨罩。
7、厚度:全部为4mm厚度,防爆性能优越。
8、使用:化工厂、危险厂房、厂用、电厂、户内外。
9、优势:元件根据用户选择而定,假一赔十。
10、配件:可根据用户进出线不同配备格兰头。
订货须知
1、防爆配电箱箱形式多样,网上价格只做参考,订货前请与客服联系;
2、防爆配电箱订货时请提供接线图及仪表的外形尺寸;
3、防爆配电箱内装元件满足防爆标准要求时可由用户提供;
4、本公司所有产品均采用普通物流发货,如需要快递请注明
5、本公司所有产品质保期均为一年,在质保期内如非人为损坏,均免费维修;